220kg Small Duty Electroplating Latch Action Toggle Clamp

SUS#316 Pull Action Adjustable Latch U-bolt Toggle Clamp with Catch Plate 4002-SS

Adjustable Steel Pull Action Latch U-bolt Toggle Clamp Destaco 324-SS / GH-4002-SS

Features:
Pull action, big holding capacity
Application:
Welding, machining, checking fixture, assembly fixture, woodholding, metal holding, workholding clamps

Motorcycle Industry

1. Welding of car frames is used as positioning bolts and fixtures for welding molds.
Main application models: 12265,11412,11421,101-B,12205,10247,22175,25382,36020,304-E,304-H,303-E,36060,702-C,30509 etc.

2. Steering column: welding of front and rear forks and guard frames is used as positioning bolts and fixtures for welding jigs.
Main application models: 11421,11412,22175,36020,302-F,303-E etc.

3. The production of engine cylinder heads and cylinder blocks is used as fixtures for drilling machines.
Main application models: 25383,25382,12265-A,12132-A etc.

4. Carburetors, mufflers and wire harnesses are all used in the same way as in the "automobile industry."
 

Electronics Industry
 

1. In manufacturing batteries (mainly cell phone batteries or stacked cell battery blocks like cell phone batteries, such as laptop batteries; other batteries will also be used, but in small quantities), manual toggle clamps are used in:
(1) the semi-finished electric cores produced are assembled into battery blocks and used in the "assembly fixture" on the assembly line,
Main application models: 101-A,102-B,22100,201-B,36204 etc.
(2) the comprehensive performance of the battery block is tested and used in the "test jig." Main application models: 101-A,201,20400,20800.

2. In the manufacture of mobile phones (or similar products), manual toggle clamps are used in the:
(1) production of circuit boards.
(2) mobile phone comprehensive performance test. When the mobile phone is assembled without batteries, the comprehensive performance of the mobile phone is tested, with the fixture used in the "test jig." Main application models: 101-A,101-B.

Note: Manual toggle clamps can be used for all products or parts that are similar to the above points regarding the manufacture of materials and production methods and have the characteristics of continuous mass production.

Refrigeration Equipment Industry

Refrigeration equipment mainly means medium and large cold stores, refrigerators/ cold closets, refrigeration trucks and other products. These products' manual toggle clamps are mainly used in the following aspects:
(1) Production of refrigeration equipment intermediate layer - PU foam insulation material serves as fixtures on the "foaming mold."
Main application models: 36224,36003,304-E,304-H,40341 etc.

(2) The welding of keels of cabinets, boxes and cars are used as fixtures and positioning bolts for "welding jigs."
Main application models: 11421,11412,203-F,12265,36020,304-E etc.

(3) The welding of gold sheet metal for the inner and outer layers of refrigerators, boxes and cars can be used as follows.
(3-1) For medium and small mass production, it is used in "welding molds."
Main application models: 11412,12265,210-C,203-F etc.

(3-2) For medium and large scale non-standard production, F-type clamps or crushing clamps are used, while C-type clamps are less used.

Features:
1. Hand grips are covered with an oil and stain resistant red vinyl or red plastic for easy identification and to assure the safety and comfort of the operator.
2. All die-stamped steel parts are deburred, cleaned, and receive a zinc plated finish that resists corrosion and created a smooth, easy to clean surface.
3. Heavy duty rivets are used to maintain accuracy and to increase endurance. All heavy-duty clamps receive hardened ground pins and bushings.
4 .Flanged washers are supplied with all U-Bar and open bar models. Weld-on bolt retainers are supplied with all solid bar models.
5. Toggle mechanism designed to allow maximum clearance for ease of loading and unloading work piece.