Stainless Steel#304 Horizontal Handle Toggle Clamp Destaco 225-USS / GH-225-DSS

Stainless Steel#304 Horizontal Handle Toggle Clamp Destaco 225-USS / GH-225-DSS
 
Manual Quick Release Stainless Steel Horizontal Hold Down Handle Toggle Clamp GH-225-DSS
 
Features:
Quick release, big holding capacity
Application:
Welding, machining, checking fixture, assembly fixture, woodholding, metal holding, workholding clamps

 
Railway Vehicle Industry (including subways and light rail vehicles)
 
1. Body keel welding is used as fixtures for welding molds.
Main application models: 225-DSS,101-J,10247,22502-B,11421,203-F,12130,702-C,702-D.
2. For welding of the outer metal plate of the car body, manual toggle clamps are used as fixtures.
Main application models: F clamps.
3. Welding of door panels is used as positioning bolts and fixtures for welding jigs. Main application models: 11412,12205,10247,225-D,21382,304-C,304-E etc.
4. Welding of seats is used as fixtures for welding fittings. Main application models: 12265,11421,36020,22235 etc.
5. The production of molded foams for luxury seats is used as fixtures for foaming molds. Main application models: 702-D,40341,304-H etc.
6. The adhesion of luxury auto interior accessories is used for adhesion and fixation between interior accessories and auto bodies.
Main application models: F clamps.
 
Plastic Products Manufacturing Industry
Plastic products are basically divided into two categories: blow molding and injection molding. At present, no manual toggle clamp has been found in blow molding, while a large number of manual toggle clamps have been used for injection molding products. Even single-machine and single-model "injection molding machines" have begun to replace the old screw rod with 7-head manual toggle clamps or corner cylinders for fixing molds.
Notes:
(1) For the single-machine single-model injection molding machine, manual toggle clamp 7-heads and corner cylinders are widely used to replace the old screw rod nut fixing molds.
(2) In the loop injection molding production line, the manual toggle clamp is widely used as open/close locking mechanism for the upper and lower molds on the molds of the production line.
(3) In the production line of injection molding, the manual toggle clamp is widely used as a locking mechanism in its mold.
Main application models: 225-DSS, 10448,302-F,36060,303-E,40341,431 etc.
 
Electronics Industry
 

1. The manual toggle clamp is used as a component on the "mechanical winding machine" for fixing the core frame.
Main application models: 12130,12130-A etc.

2. Electronic toys, game consoles and IC cards.

3. The production of weighing sensors uses manual toggle clamps, with process locations unknown.

4. In the production of electronic wiring, manual toggle clamps are used for embedded wires.
Main application models: 30600HL,30600PR,31200HL,31200PR.

5. In manufacturing batteries (mainly cell phone batteries or stacked cell battery blocks like cell phone batteries, such as laptop batteries; other batteries will also be used, but in small quantities), manual toggle clamps are used in:
(1) the semi-finished electric cores produced are assembled into battery blocks and used in the "assembly fixture" on the assembly line,
Main application models: 225-DSS, 101-A,102-B,22100,201-B,36204 etc.
(2) the comprehensive performance of the battery block is tested and used in the "test jig." Main application models: 101-A,201,20400,20800.

6. In the manufacture of mobile phones (or similar products), manual toggle clamps are used in the:
(1) production of circuit boards.
(2) mobile phone comprehensive performance test. When the mobile phone is assembled without batteries, the comprehensive performance of the mobile phone is tested, with the fixture used in the "test jig." Main application models: 101-A,101-B.

Note: Manual toggle clamps can be used for all products or parts that are similar to the above points regarding the manufacture of materials and production methods and have the characteristics of continuous mass production.