Payment & Shipping Terms:
|Usage:||Motorcycle Industry||Material:||Metal / Stainless Steel#310|
|Standard Or Nonstandard:||Standard||Structure:||Straight Line Hold Down Toggle Clamp|
|Type:||Manual Quick Release||Application:||Used As End Caps For Foaming Molds|
|Pack:||PE Bag||Thread Type:||MM / INCH|
Manual Quick Release Push and Pull Type Toggle Clamp Destaco 601-O / GH-301-BM
Manual Push and Pull Type Hold Down Handle Toggle Clamp Destaco 601-O / GH-301-BM
Quick release, small holding capacity
Welding, machining, checking fixture, assembly fixture, woodholding, metal holding, workholding clamps
|Weight (g)||Holding Capacity (kg)||Plunger Strock (mm)||Handle Opens (º)||Spindle Supplied|
1. Welding and welding inspection of various door panels are used as positioning bolts and fixtures for welding and testing molds.
Main application models: 702-C,702-D,101-E,10247,12130,12135,12137,304-E etc.
2. Welding of various automobile roof and side windows is used as fixtures for welding fittings.
Main application models: 11412,203-F,21502-B etc.
3. Welding of various car seats is used as positioning bolts and fixtures for welding fittings.
Main application models: 301-B, 11412,12265,102-B,36020,303-E etc.
4. The production of molded foams for luxury car seats is used as fixtures for foaming molds.
Main application models: 702-D,40341,304-H, etc.
5. The production of various automobile (motorcycle) mufflers is used as fixtures for welding jigs.
Main application models: 11412,10247,12305,22175,25382,36020,303-E,305-H etc.
6. The production of various automobile (motorcycle) carburetors is used as fixtures for jigs and fixtures for drilling machines.
Main application models: 201-B,21382,21383,21384 etc.
7. The production of various automobile (motorcycle) wiring harness and electrical appliances is used as fixtures for testing jigs. Some of them are also used for assembling fixtures during assembly.
Main application models: 201,201-A,201-B,101-A etc.
8. Production of various automobile steering wheels:
1) used as fixtures for welding jigs,
Main application models: 201,201-A,201-B,101-B.
2) used as end caps for foaming molds.
Main application models: 304,305 series.
9. Production of various automobile interior accessories:
1) Dashboards, etc. (using PP, ABS materials); used as clamping fixtures for "casting molds";
Main application models: 431,40341.
2) Dashboards, etc. (using PU materials); used as clamping fixtures for "foaming molds"; and
Main application models: 40341,10448,20448,702-D etc.
3) Inspection of interior accessories is used as positioning and locking fixtures for testing jigs;
Main application models: 101-D,12130,12135,302-F etc.
4) Lining (with leather, wool cloth materials) is used as fixing fixtures for fixing upper and lower molds on the press.
Main application models: 40370,40380.
10. The rivets and welds on the chassis of small cars such as minibuses, jeeps and sedans are used as positioning and locking fixtures for riveting and welding jigs.
Main application models: 702-C,702-D,702-K,303-E,304-H etc.
1. Welding of car frames is used as positioning bolts and fixtures for welding molds.
Main application models: 12265,11412,11421,101-B,12205,10247,22175,25382,36020,304-E,304-H,303-E,36060,702-C,30509 etc.
2. Steering column: welding of front and rear forks and guard frames is used as positioning bolts and fixtures for welding jigs.
Main application models: 301-BM, 11421,11412,22175,36020,302-F,303-E etc.
3. The production of engine cylinder heads and cylinder blocks is used as fixtures for drilling machines.
Main application models: 25383,25382,12265-A,12132-A etc.
4. Carburetors, mufflers and wire harnesses are all used in the same way as in the "automobile industry."
Note: Manual toggle clamps can be used for all products or parts that are similar to the above points regarding the manufacture of materials and production methods and have the characteristics of continuous mass production.
Push-Pull Toggle Clamp
The handle of this clamp moves the securing bar in a straight line. Once the handle is engaged, the securing arm pushes into an object, locks, and holds it in place. Generally, you can lock the clamp in two positions. They are also suited for clamping different objects together, such as pieces of wood and molds.
The push-pull clamp has a superb plunger that travels in and out. As the name suggests, the clamp offers push and pull offers. It may lock in either the pull or push position. It may also be referred to as a straight line or plunger-style clamp.
Contact Person: Jim Yu