11mm 14mm Jointech Double Wire Single Ear Stepless Hose Clamps

Steel Adjustable Double Wire Hose Clamp for Water Pipe Clipping or woodworking

APPLICATION - Hose clamps used to seal various types of hoses, pincers can increase clamp force, designed for repairing pipes & plumbing systems. Widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect for automotive, industrial, boat/marine, shield, household etc. both indoor and outdoor.

These clamps are universal and will work with any brand of crimp style PEX fittings or PEX tubing.

Interlocking ring that forms a complete 360-Degree watertight seal

Perfect for connecting PEX to crimp type fittings in hard to reach spaces

Some such clamps feature dimples intended to provide a spring effect when the diameter of the hose or tube contracts or expands due to thermal or mechanical effects.

Many other methods can be used to attach hoses or tubing, such as compression fittings (where a nylon or soft metal ferrule is compressed onto the hose by the tightening of the fitting), push-fit fittings (where the hose is inserted inside of a compression sleeve, designed such that force against the hose causes the sleeve to tighten), swage fittings (where a stiff collar is compressed onto the hose), clamp fittings (where two blocks are tightened onto the sides of the hose, often found on garden hoses), crimp banding (similar to worm gear banding but a crimp is used instead of a screw/thread), and a multitude of others. However, these devices are not typically referred to as hose clamps.

Hose clamps are frequently used for things other than their intended use, and are often used as a more permanent version of duct tape wherever a tightening band around something would be useful. The screw band type in particular is very strong, and is used for non-plumbing purposes far more than the other types. These clamps can be found doing everything from mounting signs to holding together emergency (or otherwise) home repairs.

Another handy attribute: worm-drive hose clamps can be daisy-chained or "siamesed" to make a long clamp, if you have several, shorter than the job requires.

Hose clamps are commonly used in the agriculture industry as well. They are used on Anhydrous Ammonia hoses and are made from a combination of steel and iron. Anhydrous ammonia hose clamps are often cadmium plated to prevent rust and corrosion.

Double wire designed screw clamps are very useful and provide great clamping force.

The smooth edges of the round wire are harmless to hands or hoses.

Double steel wire are more stronger and can be used for long time fastening.

Convenient to use, simply release and tighten the screw to adjust the clamp diameter.

The outer edge of the band with smoothing and shaping treatment precludes the damage of the hose.
Using high quality material and precise stamping molding, prevents thread stripping.
With precise design, uniform stress, good sealing ability, can be twisted smoothly, and used multiple times

The double wire bolt clamp is a very useful clip where concentrated clamping force is needed.
The smooth edges of the round wire are kind in application.
Prevent hose extrusion through the worm gear slots of soft hoses with these

Galvanized Mild Steel Wire Hose Clamp.
Galvanized iron wireband is more stronger and can for long time fastening use.
To adjust the band diameter range by release and tighten the bolt.
Perfect for industrial or home use.